QA Inspection Checklist Template
This template covers the three main inspection points in a manufacturing process. Adapt it to your specific products and processes.
1. Incoming Material Inspection Checklist
Purpose: Verify that incoming raw materials and components meet specifications before they enter production.
When to use: Every incoming delivery
Inspector: QA Inspector / Receiving team
Documentation Check
- Purchase order matches delivery note
- Supplier certificate of conformance received
- Material test reports received (if required)
- Batch/lot numbers recorded
- Expiry dates checked (if applicable)
Quantity Check
- Delivered quantity matches purchase order
- Shortages documented and supplier notified
- Overages documented and disposition decided
Visual Inspection
- Packaging intact (no damage, moisture, contamination)
- Labels correct and legible
- No visible defects, damage, or contamination
- Colour/appearance matches specification
- Photos taken of any anomalies
Dimensional/Physical Check (if applicable)
- Dimensions within specification (record measurements)
- Weight within specification (record weight)
- Physical properties meet specification
Disposition
- ACCEPT: Material meets all requirements → Move to approved storage
- CONDITIONAL ACCEPT: Minor deviation, approved by QA Manager → Move to quarantine with note
- REJECT: Material does not meet requirements → Raise NCR, quarantine, notify supplier
NCR Trigger: Any rejection or conditional acceptance requires an NCR
2. In-Process Inspection Checklist
Purpose: Verify that the production process is operating within control limits and product meets specifications at key process steps.
When to use: At defined inspection points during production (e.g., every 2 hours, every 100 units, at shift change)
Inspector: Production QA Inspector
Process Parameters
- Machine settings within specification (record actual vs. target)
- Temperature within range (record actual: ___ °C, target: ___ °C)
- Pressure within range (record actual: ___ bar, target: ___ bar)
- Speed within range (record actual: ___ rpm, target: ___ rpm)
- Other process parameters: _______________
Product Checks (Sample Size: ___ units)
- Dimensions within specification (record measurements)
- Weight within specification (record weight)
- Visual appearance meets standard
- Functional check passed (if applicable)
- Labelling correct (if applicable)
Defect Classification
For any defects found, classify as:
- •Critical: Defect that could cause safety hazard or regulatory non-compliance → STOP PRODUCTION, raise NCR immediately
- •Major: Defect that significantly affects function or appearance → Raise NCR, hold production pending QA review
- •Minor: Defect that does not significantly affect function → Document, monitor, raise NCR if trend continues
Corrective Action (if defects found)
- Production stopped (if critical/major defect)
- Defective units quarantined
- NCR raised
- Root cause identified
- Corrective action implemented
- Production resumed after QA approval
3. Final Product Inspection Checklist
Purpose: Verify that finished products meet all specifications before release for shipment.
When to use: Before every shipment or production batch release
Inspector: Senior QA Inspector / QA Manager
Documentation
- Production records complete and signed
- In-process inspection records reviewed - no open NCRs
- Batch/lot number assigned and recorded
- Production date recorded
- Expiry date (if applicable) correct
Sampling
- Sample size determined per AQL table (see below)
- Random sample selected from batch
- Sample units identified and tracked
AQL Sampling Table (General Use)
| Batch Size | Sample Size (AQL 1.0) | Sample Size (AQL 2.5) |
|---|---|---|
| 2–8 | 2 | 2 |
| 9–15 | 3 | 3 |
| 16–25 | 5 | 5 |
| 26–50 | 8 | 8 |
| 51–90 | 13 | 13 |
| 91–150 | 20 | 20 |
| 151–280 | 32 | 32 |
| 281–500 | 50 | 50 |
| 501–1200 | 80 | 80 |
Visual Inspection (100% of sample)
- No visible defects (scratches, dents, contamination)
- Colour/appearance meets standard
- Labelling correct, legible, and complete
- Packaging intact and correct
- Quantity per pack correct
Dimensional/Physical Inspection (per sampling plan)
- Critical dimensions within specification (record measurements)
- Weight within specification (record weight)
- Other physical properties within specification
Functional Testing (per sampling plan)
- Functional test passed
- Performance meets specification
- Safety checks passed (if applicable)
Disposition
- RELEASE: All checks passed → Sign release certificate, move to finished goods
- HOLD: Minor issues, pending QA Manager review → Quarantine, raise NCR
- REJECT: Batch does not meet specification → Quarantine, raise NCR, investigate root cause
NCR (Non-Conformance Report) Template
NCR Number: _______________
Date: _______________
Inspector: _______________
Location: _______________
Description of Non-Conformance:
_____________________________________________
Defect Classification: ☐ Critical ☐ Major ☐ Minor
Quantity Affected: _______________
Immediate Action Taken:
_____________________________________________
_____________________________________________
Corrective Action:
_____________________________________________
Preventive Action:
_____________________________________________
Target Closure Date: _______________
Closed By: _______________ Date: _______________
*This template is designed for use with IdeaSprout QA. See how digital checklists work in practice →*
Related Resources
- •QA Supplier Audit Checklist - Evaluate your suppliers against quality standards.
- •QA Defect Classification Guide - How to classify and prioritise defects for faster resolution.
- •QA Statistical Process Control Guide - Use SPC to detect process drift before it becomes a defect.
- •QA Platform Architecture Guide - Technical architecture for a scalable QA management platform.
- •ISO 9001 Implementation Guide - A practical 6-month roadmap for ISO 9001 certification.
- •Digital QA Checklists for Manufacturing - How to replace paper checklists with digital ones.